SATA Heavy Duty Bolt Cutter
Both sharp
and exquisite
Nine products
Latest upgrades
Product features
01
The blades of the whole series are made with Cr-V steel;
The cutting edge is quenched at high frequency,
and can easily cut low-carbon steel and medium-carbon steel with a hardness ≤HRC 38.
02
Double hole stop pad on the front
prevents loosening of bolts.
03
Pressure plate on the back and the threaded construction
can effectively prevent blades from jumping.
04
Coupling adjustment structure
makes it easier and quicker to cut;
Adjusting bolts
help to adjust the edge precisely and quickly.
05
All the blade surfaces have been finely polished;
The TPR double color handle
is anti-slip and wear-resistant and has a comfortable grip.
06
Heavy Duty Bolt Cutter 8" head is reinforced with rivets, and is more durable;
The adjusting bolt
avoids the occurrence of biting edges;
Tailgate spring makes it easier to carry.
Product parameters
Application scenarios
Product number | Product name | Maximum cutting capacity | |
Low-carbon steel(?MM) | Medium-carbon steel(?MM) | ||
93501A | Heavy Duty Bolt Cutter 8＂ | 3.5 | 3.17 |
93502A | Heavy Duty Bolt Cutter 12＂ | 5 | 4 |
93503A | Heavy Duty Bolt Cutter 14＂ | 7 | 5 |
93504A | Heavy Duty Bolt Cutter 18＂ | 8 | 6 |
93505A | Heavy Duty Bolt Cutter 24＂ | 10 | 8 |
93506A | Heavy Duty Bolt Cutter 30＂ | 13 | 10 |
93507A | Heavy Duty Bolt Cutter 36＂ | 16 | 12 |
93508A | Heavy Duty Bolt Cutter 42＂ | 19 | 14 |
93509A | Heavy Duty Bolt Cutter 48＂ | 22 | 16 |
Note: The maximum cutting hardness is no more than 38HRC
Friendly reminders
1. When using the bolt cutter, wear necessary protective equipment.
2. This product is not suitable to cut workpieces with a hardness of more than 38HRC and a temperature of more than 300°C, otherwise it will cause collapsed edge and anneal.
3. Try to place the workpiece close to the root of the cutting edge.
4. Check whether the head bolt is loose before use. If it is, tighten it in time.
5. It is forbidden to use this product as a hammer for tapping operations.
6. It's forbidden to use this product on electrical equipment.
7. It is recommended to apply anti-rust oil to the blade before storage to prevent rust.
